Our IPTV service works on MAG boxes with MAC address registeration. Here is how:

Step 1. Firstly, to settings, then system settings in the “inner portal”.

Step 2. Navigate to “software update”, press OK, and then “red button” to update the box’s software. Be patient when the box will restart.

Step 3. Go to Servers/General and write pool.ntp.org and press OK. Go back.

Step 4. Navigate to Portals and on Portal 1 , set it up with this information:

Portal name: Upmaker

Portal URL: http://iptv.#####.com:8080/c/

Step 5. Press OK to save (You can go to Advanced settings to change the time zone of the EPG, if this is necessary)

Step 6. Reboot your device and you can watch the channels if you have sent your MAC address to Upmaker support to register into the servers when ordering a subscription.

Step 7. Enjoy 😉

9 Easy Ways to accelerate your Wi-Fi for Streaming

Wi-Fi connectivity is very important nowadays. You need it to watch stuff online, enjoy some video content and so on. The cool thing about Wi-Fi is that it allows you to stream videos, download files and so. Let’s face it, we all need a good Wi-Fi instead of just depending on wired internet all the time. That’s especially true if you need IPTV and other stuff like that. It makes a lot of sense to start using Wi-Fi right away. But many times the speed is a bit slow. Which is why we are here to help you speed up your Wi-Fi streaming process fast and easy. Here are some tips that will be able to help you.

Find the weak link

When your IPTV connection lacks good speed, there will most likely be a weak link in that regard. There are 3 things that can malfunction here. The server that provides streaming content might not work, the ISP is malfunctioning, or your Wi-Fi connectivity is not good at this time. You have to study every situation as you figure out which is the best approach here.
In the case of streaming servers, they keep your content on servers online. If you use something like Hulu or Netflix, then you won’t have to worry as they tend to have a very large bandwidth. Of course, if you experience loading hiccups, that may be due to the overall quality you watch the content at. HD or 4K content will obviously take a bit longer to stream. Test your connection to other streaming services and then make sure that every one of them delivers HD content. Fixing this issue from the streaming server side is not possible most of the time. You can go for a lower resolution, or you can switch to a premium streaming service.
When the issue comes from your internet connection, you should consider going to speedtest.net. That’s where you can see the current internet speed. If you want to stream 1080p, you will need 8 Mbps, whereas 4K content needs 25 Mbps. Fixing this problem is easy, in case you don’t have the right bandwidth, you just go to the internet service provider and buy more. Just make sure that you don’t pay too much for the bandwidth in case you don’t need it. Lowering the stream quality can also help.
Wireless connections can also be tested via speedtest.net. If your connectivity is good, but you have streaming problems, we created a list of things that you can do in such a situation!

Connect to the 5Ghz band

The reason why you want to switch to this band is that it’s more powerful and devices tend to transmit data a lot faster. Simply put, you get 23 channels instead of 3. Some other transmission technologies are only usable by the 5 GHz band, so there’s that. If the signal strength is not going to be a problem, then you need to make sure that you enable the 5 GHz band. You can do that by entering your browser and enabling it in the router settings. Keep in mind that only some of the newer models offer support for this. Study the Wi-Fi approach, and you will be more than happy with the results and the entire experience.

Change the Wi-Fi channel

It’s important to note that the Wi-Fi is very closely related to the band used by your router. The band will have multiple channels. The router won’t use all channels, only specific ones. That being said, you have to use an app like Wi-Fi Analyzer that will help you figure out what channels are used by every network. The idea here is to identify the channel that’s not used heavily, and then you go to the router interface and change the traffic to that channel. Every router will have specific instructions regarding the option of changing channels, but it will work quite nicely and you just have to adjust and adapt it, to say the least. But it will be worth it; you can rest assured of it.

Optimize the Wi-Fi signal

There are plenty of options to consider when it comes to stuff like this. One of them is antenna positioning. You want to be certain that the antennas are not obstructed, as that’s how you can get the best possible results. If possible, you can add an external antenna, especially if the router only has internal ones. Then you also have to think about router placement too. You want to keep it away from electric appliances as they can create interferences, so you want to avoid all of that as much as you can. Walls and other obstructions can also be problematic here.

Enable WMM and QoS

Some of the better routers that you can use for streaming will have quality of service features, and they can be adjusted and adapted manually, which is a very good thing. You can also start the WMM feature if you want to. The idea with this feature is that it was created to improve the sharing of audio, voice, and video via wireless networks. It’s important to double check the router documentation, as that’s where you can see all the information. It’s not going to be a walk in the park, but it can bring in front some nifty results all the time.

Try to use a signal extended
Let’s face it, no matter how powerful your router might be; it’s still limited to the location you are placing it at. The best thing that you can do is to purchase a wireless range extender. You have to place that at one point where the signal is very good, and the unit will extend the range quite a bit. You want to avoid any kind of rush in this perspective, so try to consider that. There are lots of companies like Netgear and TP-Link that offer range extenders, so you just have to take your time as you figure out the right option, and the ROI can indeed be more than ok in this perspective no matter the situation.

Upgrading your router

Even if you don’t use the router every day, it’s still a very good idea to update the router once a few years. New models include new features and better performance, sometimes they even have a better range, which is extremely important. Plus, if you have a new phone, you also want a new router that will help offer all the features you need.

If you think about upgrading the router for IPTV and other uses, it’s important to keep in mind a few features. A strong coverage and signal output will be great features. WMM support, 802.11ac compatibility as well as dual-band support are pretty much a necessity nowadays, so try to consider all of that as much as you can in that perspective. Of course, if you use your router solely for streaming, then you may want to visit Google as you try to access a list with the best routers for streaming.

Increase your security

Of course, getting a new router with amazing features doesn’t mean anything if the security is not a good one. Ideally, you want to make sure that you protect your wireless network with a very complex password. Use WPA-PSK if possible. Also, adding proper antivirus and anti-malware solutions on your devices is a very good idea. In case your network is slow, then you may want to test your devices to see if that comes from any virus on your computer. Sometimes your network might be used by malware for maleficent purposes, so you want to remove that software the best way that you can.

Lower the stream quality

Ideally, you want to keep the stream quality high. But if it still doesn’t work, then you can run a wired connection from your computer or purchase some powerline network adapters. If that won’t help, then you can keep using the Wi-Fi connection, but you have to lower the stream to 720p for example. It’s not a huge quality loss, so don’t stress too much about that. Just try to test multiple options as you find the right one for you.

As you can see, there are plenty of methods you can use to speed up your Wi-Fi for streaming. Sometimes this will take a little while to get the job done properly, other times it will require a bit of tinkering. But as a whole, you can still obtain some very good results, so try to consider that as much as you can. It’s going to bring in front a simple, better way to boost your IPTV results, so try to consider that. Just remember, the value that you can obtain this way is very impressive. Plus, do keep in mind that you have to change the router once a few years. Using these ideas will help you a lot, and it will also make the entire process very simple too. Just give these ideas a shot, and the results can be more than ok!

How to add m3u playlists to MAG Box 250/254/275

Step 1. Copy and paste the M3U link in an internet browser (i.e. Chrome, Firefox, etc) and Enter. Your M3U playlist will be downloaded. Save the m3u file as on your flash Memory (remember its name!).

Step 2. Insert the flash Memory to your device MAG device.

Step 3. On the main screen, press “Home Media” (embedded portal)

Step 4. Find your flash memory’s name and select it and then press OK.

Step 5. Choose your Upmaker m3u playlist, press OK.A message will be shown, asking if you want to add the channels, agree to that:

Step 6. Hit the F3 Yellow button on your remote to add the playlist.

Step 7. After the channels have been added, press TV button on the remote

Step 8. You can remove the flash memory from your box.

Step 9. There you have it! Enjoy your Upmaker subscription.

How To Play m3u Files on Enigma2

In this tutorial, we’ll walk you through setting up your IPTV subscription (with an m3u link) in your Enigma2 (Vu+/Dreambox) box. This can be done using a useful and free-to-use software client called putty. (here is their website: https://putty.org/)
Please follow these steps:

Step 1– Download puTTY

Step 2– Install puTTY

Step 3– Open putty

Step 4– Type the host name : local ip address for box

Step 5– input the connection type setting : “Telnet” and Enter

Step 6– Enter the username and password: ( user & password = root )

Step 7– Only put the username and password (replace the ***##) from your m3u link, in this template link (ask for your “auto script” if you can’t do this for any reason):
wget -O /etc/enigma2/iptv.sh “http://iptv.upmaker.com/get.php?username=***##&password=***##&type=enigma22_script&output=mpegts” && chmod 777 /etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh

Step 8– Paste it in ssh section of puTTY

Step 9– Enter & be patient while it is being installed

Step 10– Reboot your receiver

Step 11– Go to your box “Favorites” and you should have a new bouquet of channels.

Step 12– Enjoy Your Upmaker Subscription!

How to install UPMAKER IPTV on your Perfect Player step by step:

You can easily configure our service on your android device using an m3u link. Your link will be sent in your subscription email. This can be done using several apps, including a free, yet powerful app named “Perfect Player IPTV”.

Please take the following steps:

Step 1. Download and install “perfect player IPTV” from play store on the desired android device and open it.
***You can also download it from here: http://apk-dl.com/perfect-player-iptv

Step 2. Tap on “setting” button. Go to “GENERAL” menu > playlist > Copy and paste your m3u link in the “playlist” field, and enter a name for it. For example, “Upmaker IPTV”. Tap on OK afterwards.
***Note: Please do not check the “VOD” option.

(optional): Step 3. Open EPG > copy and paste EPG link (can be found in the subscription email) in the EPG field > (Use the shift option to shift the time of all programs if Upmaker’s EPG is not synced in your country)

Step 4. In GUI > please enable “show channels group as folder” option
*** In the “playback” menu, make sure to choose a proper “decoder” or else you can’t watch some of the content. “software” decoder usually works well.

Step 5. In Advanced > enable download supposed logos

Step 6. After applying these, please make sure to “backup” your setting as a file and store it. This can be done in “defaults” menu. This will enable you to quick set up your app again in case you lose the configurations you made.

Step 7. Restart the app.

Step 8. Enjoy your Upmaker subscription!

How to Install IPTV on Smart TV – LG – Samsung

Our subscriptions can be used directly in your smart TV (LG, Samsung, Amazon Fire, Bush and any other WebOS operating smart TV).

You need to take the following steps to configure your IPTV subscription on your Smart TV:

Step 1. Go to your TV’s specific app store (i.e. LG store for LG, Amazon store for Amazon fire, etc). Search for “Smart IPTV” and download the app.
(Click on this link to find more instructions on this app: http://siptv.eu/howto/ )

Step 2. Start the application. Look for your “MAC address” of your TV in that page.

Step 3. Now go to this web page: http://siptv.eu/mylist/

Step 4. On that page, pay attention to the section titled ‘Add external playlist links (URLs)’ and enter the MAC address that you read in STEP 2. in the “Link”, copy and paste the m3u link that you have received from us in the subscription email.

Step 5. Now, restart the Smart IPTV app in so that it will reboot with the changes we have made on it.

Step 6. After rebooting, you should be able to see your new Playlist of channels.

Step 7. Enjoy your Upmaker subscription!

Note: This application (smart IPTV) has integrated EPG support.

How to install IPTV on iPhone and iPad (ios) via “GSE Smart IPTV”

The M3U link that you receive in your subscription can be used in many apps on IOS (apple phones, tablets and smart TVs). Some of these apps are not free to use.

However, GSE IPTV is a versatile and free app that you can use on your IOS (and android) devices.

download GSE Smart  IPTV  from app store.

Step 1-Install the app and then go to Remote Playlists from the app menu (the three lines)

Step 2- Tap on the plus icon now.

Step 3- Tap on Add M3U URL

Step 4- Input Upmaker IPTV in Playlist name

Step 5- Copy and paste the M3U link that was sent to you in your Upmaker subscription email in Playlist link (Make sure to remove all the text that is already in the field)

Step 6- tap on Add

There you have it!

Now go back to Remote playlists (in Step 1) and tap on Upmaker IPTV and you can see the channels listed by the countries.

Pick your desired country and select the channel that you want.

Enjoy your IPTV Subscription.